|
| |
|
HD Distribution |
|
|
|
|
|
With eight sets of component video inputs and outputs, the
V85 allows you to view all your component video sources independently on
up to eight different high-definition TVs and/or monitors in as many
rooms. The V85 also distributes standard composite video from
non-component sources such as CCTV cameras and VCRs.
The V85 boasts amplified outputs that send hi-def component video up to
300 ft. over standard RG-6 coaxial cable. For further distances, built-in
active Baluns translate the signals allowing them to be sent up to 500 ft.
over a single CAT5. The V85's zero-loss design provides the best possible
picture, even when the TVs are located far from the source equipment. |
| |
|
|
|
HDR44 Video Router |
 |
- Routes 4 HD video sources*, to 4 zones (up to 500 ft. away), in tandem
with digital and analog audio
- Supports resolutions of 1080p, 1080i, 720p, 480p and 480i
- R44WP Receive Wall Plate+ in each zone utilizes 2 Cat5 cables
from the HDR44 to output all video and audio
- System control options:
- R44WP Receive Wall Plate (included) in each zone
- Single IR receiver+ plugged into the back of the HDR44
(controls all zones)
- Expandable to 16 zones with an additional HDR44 chassis (professional
installation required)
|
HDMI Matrix Switches |
|
 
|
|
|
|
| The
WyreStorm MAT4T410 is a routing type matrix that allows four
different HDMI inputs to be displayed on 4 different UTP (Cat5e/6)
outputs. The MAT4T410 provides RS 232 port and a remote for control. |
The
Wyrestorm MAT8T820 is a routing type matrix that allows 8 different
HDMI inputs to be displayed via 8 different HDMI outputs, (or UTP / CAT5e
/ Cat6 outputs). The MAT8T820 provides IR routing, local IR for
control, a remote for control, RS232 for control, RS485 for control, and
Ethernet (TCP/IP) for control. |
|
HDMI Extender |
|
|
Extend HDMI Video up to 60 Meters
HDMI Extender allows for the extension of an HDMI video signal up
to 60 meters away by using the extender units and two Cat5e or Cat6 Ethernet cables.
This unit will support DDC and HDCP signal transfers.
|
|
|
|
|
|
